MIL-DTL-24308 Filter Connectors

Filtered D-Sub connectors meet the harsher requirements of the military specification while offering the same insertion loss and attenuation performance found in our circular connectors. Note, that in this series, the pin contacts represent the 'plug' style connector while the socket mating contacts are the 'receptacle'. Jerrik offers both standard and high density arrangements for both shell types.

See the outline dimensions for both the connectors and the panel cutouts on the following pages. Optional mounting hardware, not shown, is available. The mounting choices include through hole, clinch nut and board mount brackets integral to the shell.

This family of connectors offers mating interface dimensions straight from the MIL-DTL-24308 while the 'rear' of the connector is larger to house the filter components. Other popular shell configurations include adapters, board mounts, right angle terminations and our newest SEALED D-SUBS.

Contact arrangements come in standard 9 to 50 contacts or high density patterns from 15 to 104 contacts. Jerrik also offers the several non-standard patterns to include higher power pins on the same connector as signal pins. These patterns include the 36W4 and 8W8. Consult with the factory for assistance when combining power and signal pins.

The Jerrik 24308 shells are machined aluminum alloy and are offered with electroless nickel, gold, and cadmium finishes. In addition, stainless steel shells are offered with passivation or with an electro-deposited nickel finish.

This family also offers three termination styles, PC tails, solder cup and crimp configurations.
[ See the design guide for details ]

For a relatively inexpensive, effective box mount connector offering flexibility in a small package, the Jerrik MIL-DTL-24308 are a great solution.